Decimeters to Microinches
Converter

Conversion Table

How to convert

1 decimeter (dm) = 3937010 microinch (µin). Decimeter (dm) is a unit of Length used in Metric system. Microinch (µin) is a unit of Length used in Standard system.

Decimeter: A Unit of Length Used in the Metric System

The decimeter (dm) is a unit of length in the metric system, which is the most widely used system of measurement in the world. The decimeter is equal to one tenth of a meter, which is the SI base unit of length. The decimeter is also a derived unit in the International System of Units (SI), which is the official system of measurement for science and engineering. The symbol for decimeter is dm. The decimeter is used for measuring medium distances and dimensions, such as the height of a bookshelf or the width of a door. The decimeter is also used for measuring volumes, such as the volume of a cube or a box. The decimeter is named after the deci prefix, which means one tenth in Latin. In this article, we will explore the definition, history, usage and conversion of the decimeter as a unit of length.

Definition of Decimeter

The decimeter is a unit of length that is equal to one tenth of a meter. It is defined as 1/10 meters. The meter is defined as the length of the path travelled by light in vacuum during a time interval of 1/299792458 seconds.

The definition of the decimeter has not changed since its introduction by the French Academy of Sciences in 1795, as part of the decimal metric system that was adopted after the French Revolution. However, the definition of the meter has changed several times over time, as different standards and methods of measurement were developed by various countries and organizations. The current definition of the meter as based on the speed of light was agreed upon by an international treaty in 1983.

History of Decimeter

The origin of the decimeter as a unit of length can be traced back to 1795, when the French Academy of Sciences proposed a new system of measurement that was based on decimal fractions and natural constants. The system was called the metric system, and it was intended to replace the old and diverse systems of measurement that were used in France and other countries at that time. The metric system was designed to be simple, universal and rational.

The base unit of length in the metric system was the meter, which was defined as one ten-millionth of the distance from the equator to the North Pole along a meridian through Paris. The meter was divided into ten decimeters, each decimeter into ten centimeters, and each centimeter into ten millimeters. The prefixes deci, centi and milli indicated that they were one tenth, one hundredth and one thousandth of a meter respectively.

The metric system was officially adopted by France in 1799, and gradually spread to other countries over the next century. In 1875, an international treaty called the Metre Convention was signed by 17 countries to establish a common standard for measuring length and mass. The treaty also established an international organization called the International Bureau of Weights and Measures (BIPM) to maintain and improve the metric system.

In 1889, a new standard for the meter was created by using a platinum-iridium bar that was kept at BIPM. This bar was called the International Prototype Metre, and it was divided into ten equal parts to make standard decimeters. The bar was also compared with other national standards to ensure accuracy and consistency.

In 1960, an international conference called the General Conference on Weights and Measures (CGPM) adopted a new system of measurement called the International System of Units (SI), which was based on seven base units that could be derived from physical constants. The meter was redefined as 1,650,763.73 wavelengths of light emitted by a krypton-86 atom in a vacuum. The decimeter remained as a derived unit in SI, but it was no longer recommended for use in scientific and technical fields.

In 1983, another CGPM conference redefined the meter again as the length of the path travelled by light in vacuum during a time interval of 1/299792458 seconds. This definition was based on the speed of light, which is a universal constant that can be measured with high precision. The decimeter also changed accordingly to reflect this new definition.

Usage of Decimeter

The decimeter is a unit of length that is used for measuring medium distances and dimensions, such as the height of a bookshelf or the width of a door. The decimeter is also used for measuring volumes, such as the volume of a cube or a box.

The decimeter is commonly used in everyday life, especially in countries that follow the metric system. Some examples are:

• Measuring the dimensions of furniture and appliances.
• Measuring the size of books and magazines.
• Measuring the capacity of containers and bottles.
• Measuring the depth of water and soil.
• Measuring the distance between objects and landmarks.

The decimeter is also used in some scientific and technical fields, such as:

• Measuring the diameter and circumference of circles and cylinders.
• Measuring the volume and surface area of solids and liquids.
• Measuring the density and specific gravity of substances.
• Measuring the pressure and temperature of gases and fluids.
• Measuring the focal length and magnification of lenses and mirrors.

How to Convert Decimeter

The decimeter can be converted to other units of length by using conversion factors or formulas. Here are some examples of how to convert decimeters to other units of length in the SI system, the US customary system and other systems:

• To convert decimeters to centimeters, multiply by 10. For example, 10 dm = 10 × 10 = 100 cm.
• To convert decimeters to meters, divide by 10. For example, 10 dm = 10 / 10 = 1 m.
• To convert decimeters to kilometers, divide by 10000. For example, 10 dm = 10 / 10000 = 0.001 km.
• To convert decimeters to inches, multiply by 3.937. For example, 10 dm = 10 × 3.937 = 39.37 in.
• To convert decimeters to feet, multiply by 0.328. For example, 10 dm = 10 × 0.328 = 3.28 ft.

Microinch: A Unit of Length

The microinch is a unit of length that is equal to one millionth of an inch (0.000001 inch). It is a non-SI unit of measurement that is mainly used in engineering and manufacturing fields. The symbol for microinch is µin or µ". The microinch is also a derived unit in the British imperial and US customary systems of measurement.

The microinch is most commonly used when expressing small distances or dimensions, such as the surface roughness or flatness of materials and parts. The microinch is also used for measuring the wavelength of light and other electromagnetic waves.

In this article, we will explore the definition, history, usage and conversion of the microinch as a unit of length.

Definition of the Microinch

The microinch is a unit of length that is equal to one millionth of an inch (0.000001 inch). It is defined as 25.4 nanometers or 2.54 × 10^-8 meters by international agreement in 1959. One inch is equal to 25.4 millimeters or 0.0254 meter.

The definition of the microinch has changed over time, as different standards and methods of measurement were developed by various countries and organizations. The current definition of the microinch as based on the meter was agreed upon by an international treaty in 1959.

History of the Microinch

The origin of the microinch as a unit of length can be traced back to the early 20th century, when it was introduced by the American Society for Testing and Materials (ASTM) as a standard for measuring surface roughness. Surface roughness is a measure of how smooth or irregular a surface is, which affects its friction, wear and corrosion properties.

The microinch was adopted by other countries and industries that followed the American system of measurement, such as Canada and Japan. It was also incorporated into the ANSI/ASME B46.1 standard for surface texture in 1985.

The microinch was also used by some optical scientists and engineers to measure the wavelength of light and other electromagnetic waves. For example, the visible spectrum of light ranges from about 4,000 to 7,000 microinches.

Usage of the Microinch

The microinch is a unit of length that is used for measuring small distances or dimensions, such as the surface roughness or flatness of materials and parts. For example:

• Measuring the smoothness or roughness of metal surfaces, such as steel, aluminum and copper.
• Measuring the flatness or curvature of glass surfaces, such as lenses, mirrors and windows.
• Measuring the thickness or diameter of thin films, coatings and wires.
• Measuring the accuracy or tolerance of machined parts, such as gears, bearings and shafts.

The microinch is commonly used in engineering and manufacturing fields, especially in precision machining, metrology and quality control. Some examples are:

• Measuring the surface finish of machined parts, such as turned, milled and ground surfaces.
• Measuring the surface profile of textured surfaces, such as honed, lapped and polished surfaces.
• Measuring the surface geometry of complex surfaces, such as grooved, fluted and serrated surfaces.
• Measuring the surface defects of defective surfaces, such as scratches, pits and dents.

The microinch is also used for measuring the wavelength of light and other electromagnetic waves. For example:

• Measuring the color or frequency of visible light, infrared light and ultraviolet light.
• Measuring the polarization or phase of coherent light, such as laser light and holographic light.
• Measuring the interference or diffraction patterns of interfering light, such as interferometric light and diffractive light.

Example Conversions of Microinch to Other Units

The microinch can be converted to other units of length by using different factors and formulas. Here are some examples of conversion for different types of units:

• To convert a microinch to inches, divide by 1,000,000:

1 µin / 1,000,000 = 0.000001 in

• To convert a microinch to feet, divide by 12,000,000:

1 µin / 12,000,000 = 8.333 × 10^^-8 ft

• To convert a microinch to yards, divide by 36,000,000:

1 µin / 36,000,000 = 2.778 × 10^^-8 yd

• To convert a microinch to meters, multiply by 2.54 × 10^^-8:

1 µin x 2.54 × 10^-8 = 2.54 × 10^^-8 m

• To convert a microinch to kilometers, multiply by 2.54 × 10^^-14:

1 µin x 2.54 × 10^-14 = 2.54 × 10^^-14 km

• To convert a microinch to nanometers, multiply by 25.4:

1 µin x 25.4 = 25.4 nm

• To convert an inch to microinches, multiply by 1,000,000:

1 in x 1,000,000 = 1,000,000 µin

• To convert a foot to microinches, multiply by 12,000,000:

1 ft x 12,000,000 = 12,000,000 µin

• To convert a yard to microinches, multiply by 36,000,000:

1 yd x 36,000,000 = 36,000,000 µin

• To convert a meter to microinches, divide by 2.54 × 10^^-8:

1 m / 2.54 × 10^^-8 = 39,370,078.74 µin

• To convert a kilometer to microinches, divide by 2.54 × 10^^-14:

1 km / 2.54 × 10^-14 = 39,370,078,740,157.48 µin

• To convert a nanometer to microinches, divide by 25.4:

1 nm / 25.4 = 0.03937 µin