

Convert Decimeters to Yards (dm to yd) ▶ Conversion Table
How to convert1 yard (yd) = 9.144 decimeter (dm). Yard (yd) is a unit of Length used in Standard system. Decimeter (dm) is a unit of Length used in Metric system. Yard: A Unit of LengthA yard is a unit of length that is equal to 3 feet or 36 inches in the imperial and U.S. customary systems of measurement. It is also equal to 0.9144 meter in the International System of Units (SI). A distance of 1,760 yards is equal to 1 mile. The symbol for yard is yd. How to Convert YardTo convert a yard to other units of length, you can use the following formulas:
Where Yard is UsedThe yard is mainly used in the United States, the United Kingdom and some other countries that have historical ties with them. It is used for measuring length, distance, area and volume in various contexts such as:
Definition of the YardThe current definition of the yard was established by an international agreement in 1959 as exactly 0.9144 meter. This definition was based on a prototype bronze bar that was forged in 1855 as an exact copy of the British Imperial Standard Yard held by Parliament. The prototype bar was called Bronze Yard No.11 and was the official standard of length for the United States until 1892. The yard is defined as the length of the path travelled by light in vacuum during a time interval of (1/299792458) × (3600/3937) seconds. This means that one yard is equal to 3600/3937 light seconds.History of the YardThe origin of the yard measure is uncertain. It may have derived from the old English unit of tax assessment called the yardland, which was equal to 1/4 hide or about 30 acres. It may also have derived from the old English unit of surveying called the rod, which was equal to 1/4 chain or about 16 (1/2) feet. The word “yard” comes from the old English word “gerd” or “gyrd”, which meant a branch, a staff or a measuring rod. The word “yard” was first used to describe this length in William Langland’s poem Piers Plowman in the late 14th century. The first official standard for the yard was established by King Henry I of England in the early 12th century. He ordered that the yard should be equal to the length of his arm from the tip of his nose to the end of his thumb. The yard was also used in other countries, such as Scotland, Ireland, France and Spain, with slight variations in length. For example, the Scottish yard was equal to 37 inches, the Irish yard was equal to 40 inches, the French yard was equal to 39.37 inches and the Spanish yard was equal to 32.38 inches. The yard underwent several changes and refinements over the centuries, until it was finally standardized as 0.9144 meter in 1959 by an international agreement between the United States, the United Kingdom, Canada, Australia, New Zealand and South Africa. Example Conversions of Yard to Other UnitsHere are some example conversions of yard to other units of length:
Decimeter: A Unit of Length Used in the Metric SystemThe decimeter (dm) is a unit of length in the metric system, which is the most widely used system of measurement in the world. The decimeter is equal to one tenth of a meter, which is the SI base unit of length. The decimeter is also a derived unit in the International System of Units (SI), which is the official system of measurement for science and engineering. The symbol for decimeter is dm. The decimeter is used for measuring medium distances and dimensions, such as the height of a bookshelf or the width of a door. The decimeter is also used for measuring volumes, such as the volume of a cube or a box. The decimeter is named after the deci prefix, which means one tenth in Latin. In this article, we will explore the definition, history, usage and conversion of the decimeter as a unit of length. Definition of DecimeterThe decimeter is a unit of length that is equal to one tenth of a meter. It is defined as 1/10 meters. The meter is defined as the length of the path travelled by light in vacuum during a time interval of 1/299792458 seconds. The definition of the decimeter has not changed since its introduction by the French Academy of Sciences in 1795, as part of the decimal metric system that was adopted after the French Revolution. However, the definition of the meter has changed several times over time, as different standards and methods of measurement were developed by various countries and organizations. The current definition of the meter as based on the speed of light was agreed upon by an international treaty in 1983. History of DecimeterThe origin of the decimeter as a unit of length can be traced back to 1795, when the French Academy of Sciences proposed a new system of measurement that was based on decimal fractions and natural constants. The system was called the metric system, and it was intended to replace the old and diverse systems of measurement that were used in France and other countries at that time. The metric system was designed to be simple, universal and rational. The base unit of length in the metric system was the meter, which was defined as one tenmillionth of the distance from the equator to the North Pole along a meridian through Paris. The meter was divided into ten decimeters, each decimeter into ten centimeters, and each centimeter into ten millimeters. The prefixes deci, centi and milli indicated that they were one tenth, one hundredth and one thousandth of a meter respectively. The metric system was officially adopted by France in 1799, and gradually spread to other countries over the next century. In 1875, an international treaty called the Metre Convention was signed by 17 countries to establish a common standard for measuring length and mass. The treaty also established an international organization called the International Bureau of Weights and Measures (BIPM) to maintain and improve the metric system. In 1889, a new standard for the meter was created by using a platinumiridium bar that was kept at BIPM. This bar was called the International Prototype Metre, and it was divided into ten equal parts to make standard decimeters. The bar was also compared with other national standards to ensure accuracy and consistency. In 1960, an international conference called the General Conference on Weights and Measures (CGPM) adopted a new system of measurement called the International System of Units (SI), which was based on seven base units that could be derived from physical constants. The meter was redefined as 1,650,763.73 wavelengths of light emitted by a krypton86 atom in a vacuum. The decimeter remained as a derived unit in SI, but it was no longer recommended for use in scientific and technical fields. In 1983, another CGPM conference redefined the meter again as the length of the path travelled by light in vacuum during a time interval of 1/299792458 seconds. This definition was based on the speed of light, which is a universal constant that can be measured with high precision. The decimeter also changed accordingly to reflect this new definition. Usage of DecimeterThe decimeter is a unit of length that is used for measuring medium distances and dimensions, such as the height of a bookshelf or the width of a door. The decimeter is also used for measuring volumes, such as the volume of a cube or a box. The decimeter is commonly used in everyday life, especially in countries that follow the metric system. Some examples are:
The decimeter is also used in some scientific and technical fields, such as:
How to Convert DecimeterThe decimeter can be converted to other units of length by using conversion factors or formulas. Here are some examples of how to convert decimeters to other units of length in the SI system, the US customary system and other systems:
Español Russian Français 
Yards to Centimeters Yards to Decimeters Yards to Feet Yards to Inches Yards to Kilometers Yards to Meters Yards to Miles Yards to Millimeters Decimeters to Centimeters Decimeters to Feet Decimeters to Inches Decimeters to Meters Decimeters to Millimeters Decimeters to Yards Centimeters to Inches Feet to Inches Feet to Kilometers Feet to Meters Feet to Yards Inches to Centimeters Inches to Feet Inches to Meters Inches to Millimeters Kilometers to Miles Meters to Feet Meters to Inches Meters to Yards Miles to Kilometers Millimeters to Inches Yards to Feet Yards to Inches Yards to Meters 
About Us Contact Terms of Service 