Square Millimeters to Square Inches
Converter

Conversion Table

How to convert

1 square millimeter (sq mm) = 0.001550003 square inch (sq in). Square Millimeter (sq mm) is a unit of Area used in Metric system. Square Inch (sq in) is a unit of Area used in Standard system.

Square Millimeter: A Unit of Area

A square millimeter is a unit of area in the metric system. It is equal to the area of a square with sides that measure 1 millimeter. The symbol for square millimeter is mm2.

Definition of the Square Millimeter

The square millimeter is defined as the area of a square that has a side length of 1 millimeter. This is equivalent to 0.000001 square meter, or 0.00155 square inch, or 0.00001076 square foot.

The square millimeter is a derived unit in the International System of Units (SI), which means that it is derived from the base unit of length, the meter. It is also a coherent unit, which means that it does not require any conversion factor when used with other SI units.

History of the Square Millimeter

The square millimeter was introduced in France in 1795 as part of the metric system, which aimed to simplify and standardize the units of measurement. The metric system was based on the decimal system, which used powers of ten to relate different units of the same quantity.

The square millimeter was originally intended to be a unit of area equal to one hundredth of a square centimeter, or one ten-millionth of a square meter. However, due to a mistake in the definition of the meter at that time, the actual area of a square millimeter was slightly smaller than intended. This error was corrected in 1889, when the meter was redefined based on the distance between two marks on a platinum-iridium bar kept in Paris.

The square millimeter became widely used throughout the world for measuring small areas, especially in science, engineering, and medicine. It is also used in some everyday applications, such as measuring jewelry size, paper thickness, and screen resolution.

How to Convert Square Millimeter to Other Units

To convert a square millimeter to other units of area, we can use the following conversion factors:

• 1 square millimeter = 0.000001 square meter
• 1 square millimeter = 0.01 square centimeter
• 1 square millimeter = 0.000000001 square kilometer
• 1 square millimeter = 0.00155 square inch
• 1 square millimeter = 0.00001076 square foot
• 1 square millimeter = 0.0000001196 square yard

To convert from other units to a square millimeter, we can use the inverse of these conversion factors.

For example, to convert 50 square centimeters to square millimeters, we can use:

50 square centimeters x (100 mm2 / 1 cm2) = 5000 mm2

Where Square Millimeter is Used

The square millimeter is commonly used in many countries for measuring small areas, especially in science, engineering, and medicine. It is also used in some everyday applications, such as measuring jewelry size, paper thickness, and screen resolution.

Some examples of uses of the square millimeter are:

• The average diameter of a human hair is about 100 micrometers, which is equivalent to an area of about 0.008 mm2.
• The standard paper size for printing documents in most countries is A4, which has an area of about 623700 mm2.
• The smallest unit of measurement for digital images is a pixel, which can have an area ranging from less than 1 mm2 to more than 100 mm2 depending on the resolution and size of the screen.
• The largest diamond ever found was the Cullinan diamond, which had an original weight of about 3106 carats and an estimated surface area of about 50000 mm2.
• The smallest country in the world by area, Vatican City, has an area of about 44 billion mm2.

Example Conversions of Square Millimeter to Other Units

Here are some example conversions of a square millimeter to other units:

• 1 square millimeter = 0.000001 square meter
• 1 square millimeter = 0.01 square centimeter
• 1 square millimeter = 0.000000001 square kilometer
• 1 square millimeter = 0.00155 square inch
• 1 square millimeter = 0.00001076 square foot
• 1 square millimeter = 0.0000001196 square yard
• 1 square millimeter = 1000000 nanometers^2

Square Inch: A Unit of Area

A square inch is a unit of area measurement of a space. It is equal to the area of a square with sides of one inch in length. The symbol for square inch is in2.

Definition of the Square Inch

The square inch is defined as the area of a square that has a side length of 1 inch. This is equivalent to 0.00064516 square meter, or 6.4516 square centimeter, or 0.00000003937 square mile.

The square inch is not an official unit in the International System of Units (SI), but it is commonly used in the United States and the United Kingdom. It is also a customary unit in some other countries that use the imperial or US customary system of measurement.

History of the Square Inch

The square inch was derived from the inch, which was originally based on the length of three barleycorns laid end to end. The inch was first standardized by King Edward II of England in 1324, who defined it as equal to three grains of barley, dry and round, placed end to end lengthwise.

The square inch was used as a unit of area for measuring land, buildings, and other objects. It was also used as a unit of pressure, such as pounds per square inch (psi), which is still widely used today.

The square inch was gradually replaced by the metric units of area, such as the square meter and the square centimeter, in most countries that adopted the metric system. However, it is still widely used in some fields and applications, such as engineering, carpentry, printing, and clothing.

How to Convert Square Inch to Other Units

To convert a square inch to other units of area, we can use the following conversion factors:

• 1 square inch = 0.00064516 square meter
• 1 square inch = 6.4516 square centimeter
• 1 square inch = 0.00000003937 square mile
• 1 square inch = 0.00001076 square foot
• 1 square inch = 0.0001196 square yard
• 1 square inch = 645.16 square micrometer

To convert from other units to a square inch, we can use the inverse of these conversion factors.

For example, to convert 50 square centimeters to square inches, we can use:

50 square centimeters x (0.155000310 in2 / 1 cm2) = 7.7500155 in2

Where Square Inch is Used

The square inch is commonly used in many countries for measuring small areas, especially in engineering, carpentry, printing, and clothing. It is also used as a unit of pressure, such as pounds per square inch (psi).

Some examples of uses of the square inch are:

• The average size of an adult human fingernail is about 0.5 in2.
• The standard paper size for printing documents in the United States and Canada is letter, which has an area of 93.5 in2.
• The smallest unit of measurement for digital images is a pixel, which can have an area ranging from less than 0.00000155 in2 to more than 0.0155 in2 depending on the resolution and size of the screen.
• The largest coin in circulation in the United States is the half dollar, which has an area of about 0.7854 in2.
• The smallest state in the United States by area, Rhode Island, has an area of about 777 billion in2.

Example Conversions of Square Inch to Other Units

Here are some example conversions of a square inch to other units:

• 1 square inch = 0.00064516 square meter
• 1 square inch = 6.4516 square centimeter
• 1 square inch = 0.00000003937 square mile
• 1 square inch = 0.00001076 square foot
• 1 square inch = 0.0001196 square yard
• 1 square inch = 645.16 square micrometer
• 1 square inch = 1000000 nanometers^2