Meters to Chains
Converter

Conversion Table

How to convert

1 meter (m) = 0.049709695 chain (ch). Meter (m) is a unit of Length used in Metric system. Chain (ch) is a unit of Length used in Standard system.

Meter - Unit of Distance / Length

Unit Symbol / Abbreviation: m

Where the unit used in the World:

The meter is used as a unit to measure medium distances or lengths.
It's a standard measure for short distances (up to 1 km long), in real estate and construction, supply materials, vehicle and aircraft dimensions, short geographical distances and directions in most countries excluding the USA where foot and yard are still widely used for this purpose.
The meter is widely used in most countries and is the official unit for medium lengths and distances (for example, road signs in continental Europe show maximum vehicle hight in meters). Primary exceptions are the United States of America, and some countries where feet and yards are used in limited extent: the United Kingdom and Canada, where the yard remains in limited use as a part of imperial system (for example, yards are used on road signs for shorter distances in the United Kingdom and feet are widely used in construction and real estate in Canada).

Definition of the Unit:

The meter (metre in UK spelling) is a unit of length/distance in the metric system (SI Unit system) equivalent to the length of the path travelled by light during a time interval of 1/299,792,458 of a second (in vacuum, defined since 1983).

1 m is equivalent to 3.28084 ft or 0.000621371 miles.

History of the Unit:

As a result of the French Revolution in 1789, the old units of measure that were associated with the monarchy were replaced by the new units. The new unit of length was introduced which became known as the meter. In 1795 the meter was defined as 1/10,000,000 part of the quarter of a meridian, passing through Paris. The meter gained popularity in continental Europe during the nineteenth century, particularly in scientific field, and was officially adopted as an international measurement unit in 1875. In 1960 the meter was defined as 1,650,763.73 wavelengths of light from a specified transition in krypton-86. In 1983 the final definition of meter was accepted as length of the path travelled by light in a vacuum in 1/299,792,458 of a second.

Where it's used:

The meter is commonly used in different trades and industries (for examle in machinery manufacturing), on road signs to indicate vehicle hight limits, the distance to short travel to a given location (for example in automotive GPS navigation voice prompts), on maps to indicate small scale, for vehicle, vessels and aircragt dimensions in industry and trade. It is also the most popular unit for describing the retail estate distances and measurements (room sizes, floor measurements and so on).

Equivalents in other units and scales:

• 1 m = 1000 millimeters (mm)
• 1 m = 100 centimeters (cm)
• 1 m = 10 decimeters (dm)
• 1 m = 0.001 kilometers (km)
• 1 m = 3.28084 feet (ft)
• 1 megameter = 1000000 m
• 1 gigameter = 1000000000 m
• Units of length in the metric SI system are based on multiples or fractions of a meter.
• There are measurements of length/distance in the metric SI system greater than a meter that can be expressed in terms of metres.

1 m is equivalent to 3.28084 ft or 1.09361 yd.

The meter is a unit of length in the metric SI system and is equivalent to the length of the path travelled by light during a time interval of 1/299,792,458 of a second (in vacuum, defined since 1983).

Chain: A Unit of Length Used for Measuring Land

The chain is a unit of length that is equal to 66 feet or 22 yards or 4 rods or 100 links. It is part of the US customary and imperial measurement systems. It is used for measuring land, especially in surveying and mapping. The symbol for chain is ch. There are 10 chains in a furlong, and 80 chains in one statute mile. An acre is the area of 10 square chains. The unit is named after the chain, a measuring device that was invented by Edmund Gunter, a clergyman and mathematician, in the 17th century. The chain is also sometimes called a Gunter’s chain, a surveyor’s chain or a land chain. In this article, we will explore the definition, history, usage and conversion of the chain as a unit of length.

Definition of the Unit

The chain is a unit of length that is equal to 66 feet or 22 yards or 4 rods or 100 links. It is one of the base units in the US customary and imperial measurement systems, along with the foot, the yard and the mile. The chain is also a derived unit in the International System of Units (SI), which is the most widely used system of measurement in the world. The SI base unit of length is the meter, which is defined as the length of the path travelled by light in vacuum during a time interval of 1/299792458 seconds.

The definition of the chain has not changed since its introduction by Edmund Gunter in 1620, who based it on an earlier English unit called an acre’s breadth, which was equal to one-tenth of a furlong or one-eightieth of a mile. However, the definition of the foot, which is used to define the chain, has changed several times over time, as different standards and methods of measurement were adopted by various countries and regions. The current definition of the foot as 0.3048 meter was agreed upon by an international treaty in 1959.

History of the Unit

The origin of the chain as a unit of length can be traced back to 1620, when Edmund Gunter created a measuring device called a chain. The chain was 66 feet long and consisted of 100 metal links connected by three rings each. The links were made of thick wire with a loop at each end. The chain had brass handles at each end for holding and folding. Gunter chose this unit because it was convenient for his work on surveying and mapping land. He also named this unit after himself, as he wrote in his book: "I have taken as unit for these measurements one hundredth part [of a furlong], which I will call an Chain".

Gunter’s unit was soon adopted by other surveyors and mapmakers, who found it useful for measuring distances and areas on flat or gently sloping land. The chain was also used for laying out roads, railways and canals. The chain became part of the US customary and imperial measurement systems, which were based on earlier English units that were brought by British settlers to America. The chain was also used in some other countries influenced by British practice, such as Canada and India.

In 1785, when the United States Congress passed the Land Ordinance Act to survey and divide the public land west of the Appalachian Mountains into rectangular townships and sections, the use of the chain as a unit of measurement was mandated by law. The act also defined the chain as equal to four rods or poles or perches. The surveyors who carried out this work were known as "chain bearers" or "chain carriers", and they marked each mile along their survey lines with wooden posts called "milestones".

In 1959, when the United States, Canada, the United Kingdom and some other Commonwealth countries agreed to adopt a common definition of the foot as 0.3048 meter, based on the international yard that was defined as 0.9144 meter by an international treaty in 1959, the chain became exactly equal to 20.1168 meters.

Usage of the Unit

The chain is a unit of length that is used for measuring land, especially in surveying and mapping. The chain is also used for measuring distances on roads, railways and canals. The chain is still used in some rural areas and historical contexts in the United States, Canada and some other countries that follow the US customary or imperial measurement systems.

The chain is used for various purposes, such as:

• Measuring length, width and area of land parcels and properties.
• Measuring distances and dimensions on maps and plans.
• Measuring boundaries and borders between states, counties and townships.
• Measuring road widths and lengths.
• Measuring railway track gauges and lengths.
• Measuring canal widths and depths.

How to Convert

The chain can be converted to other units of length by using conversion factors or formulas. Here are some examples of how to convert chains to other units of length in the US customary system, the imperial system and the SI system:

• To convert chains to feet, multiply by 66. For example, 10 ch = 10 × 66 = 660 ft.
• To convert chains to yards, multiply by 22. For example, 10 ch = 10 × 22 = 220 yd.
• To convert chains to miles, divide by 80. For example, 10 ch = 10 / 80 = 0.125 mi.
• To convert chains to centimeters, multiply by 2011.68. For example, one ch = one × 2011.68 = 2011.68 cm.
• To convert chains to meters, multiply by 20.1168. For example, one ch = one × 20.1168 = 20.1168 m.
• To convert chains to kilometers, divide by 49.7097. For example, 10 ch = 10 / 49.7097 = 0.2012 km.

Equivalents in Other Units and Scales

The chain can be expressed in terms of other units of length by using equivalent values or ratios. Here are some examples of how to express chains in other units of length:

• One chain is equal to four rods or poles or perches.
• One chain is equal to one-tenth of a furlong or one-eightieth of a mile.
• One chain is equal to one-hundredth of a league or one-fortieth of a league (US).
• One chain is equal to one-hundred-millionth of an astronomical unit or one-forty-billionth of a light-year.
• One chain is equal to one-thousandth of a nautical mile or one-three-thousand-six-hundredth of a degree of latitude or longitude.