Furlongs to Inches
Converter

Conversion Table

How to convert

1 furlong (fur) = 7920 inch (in). Furlong (fur) is a unit of Length used in Standard system. Inch (in) is a unit of Length used in Standard system.

Furlong: A Unit of Length Used in the US Customary System

The furlong (fur) is a unit of length in the US customary system, which is one of the systems of measurement used in the United States and some other countries. The furlong is equal to 220 yards, which is an eighth of a mile. The furlong is also a derived unit in the imperial system, which is the official system of measurement for the United Kingdom and some other Commonwealth countries. The symbol for furlong is fur. The furlong is used for measuring long distances and areas, such as the length of a horse race or the area of a farm. The furlong is named after the furrow-long, which was the length of a furrow in one acre of a plowed open field in medieval England. In this article, we will explore the definition, history, usage and conversion of the furlong as a unit of length.

Definition of the Unit

The furlong is a unit of length that is equal to 220 yards. It is defined as 1/8 miles. The mile is defined as 5,280 feet or 1,760 yards.

The definition of the furlong has not changed since its origin in medieval England, as part of the old English system of measurement that was based on natural and traditional units. However, the definition of the mile has changed several times over time, as different standards and methods of measurement were developed by various countries and organizations. The current definition of the mile as based on feet and yards was agreed upon by an international treaty in 1959.

History of the Unit

The origin of the furlong as a unit of length can be traced back to medieval England, when it was used as a measure of land area and distance. The word furlong comes from the Old English words furh (furrow) and lang (long), meaning furrow-long. It referred to the length of a furrow in one acre of a plowed open field, which was a common system of land division and cultivation at that time. The open field was divided into strips or selions, each strip being one furlong long and one rod wide. A rod was equal to 5.5 yards or 16.5 feet. An acre was equal to four rods by 40 rods, or 160 square rods.

The furlong was also used as a measure of distance for horse racing and other sports. The standard length of a horse race was four furlongs, or half a mile. This was later increased to eight furlongs, or one mile, which became known as the classic distance for horse racing.

The furlong was adopted by other countries that followed the English system of measurement, such as the United States and Canada. It was also incorporated into the imperial system, which was established by an act of Parliament in 1824. The imperial system was based on seven base units that could be derived from natural and traditional units. The furlong remained as a derived unit in the imperial system, but it was no longer recommended for use in scientific and technical fields.

Usage of the Unit

The furlong is a unit of length that is used for measuring long distances and areas, such as the length of a horse race or the area of a farm.

The furlong is commonly used in horse racing, especially in North America and some other countries that follow the US customary system. Some examples are:

• Measuring the distance and speed of horses in races.
• Measuring the length and width of racetracks and courses.
• Measuring the height and weight of horses and jockeys.

The furlong is also used in agriculture, especially in rural areas where farms are still measured by acres and furlongs. Some examples are:

• Measuring the size and shape of fields and plots.
• Measuring the yield and production of crops and livestock.
• Measuring the distance and time between farms and markets.
• Measuring the taxes and subsidies for farmers.

How to Convert

The furlong can be converted to other units of length by using conversion factors or formulas. Here are some examples of how to convert furlongs to other units of length in the US customary system, the SI system and other systems:

• To convert furlongs to yards, multiply by 220. For example, 10 fur = 10 × 220 = 2200 yd.
• To convert furlongs to miles, divide by 8. For example, 10 fur = 10 / 8 = 1.25 mi.
• To convert furlongs to feet, multiply by 660. For example, 10 fur = 10 × 660 = 6600 ft.
• To convert furlongs to meters, multiply by 201.168. For example, 10 fur = 10 × 201.168 = 2011.68 m.
• To convert furlongs to kilometers, multiply by 0.201168. For example, 10 fur = 10 × 0.201168 = 2.01168 km.
• To convert furlongs to centimeters, multiply by 20116.8. For example, one fur = one × 20116.8 = 20116.8 cm.

Inch: A Unit of Length Used in the US Customary System

Definition of Inch

The inch is a unit of length that is equal to 1/12 of a foot. It is defined as 25.4 millimeters. The foot is defined as 0.3048 meters.

The definition of the inch has changed over time, as different standards and methods of measurement were developed by various countries and organizations. The current definition of the inch as based on millimeters was agreed upon by an international treaty in 1959.

History of Inch

The origin of the inch as a unit of length can be traced back to ancient times, when it was used as a measure of length based on the human body. The word inch comes from the Latin word uncia, meaning one-twelfth. It referred to one-twelfth of a Roman foot, which was about 29.6 millimeters.

The inch was also used as a measure of length by other civilizations, such as the Anglo-Saxons, who used it as one-third of a palm or one-twenty-fourth of an ell. The Anglo-Saxon inch was about 25 millimeters.

The inch was adopted by other countries that followed the English system of measurement, such as the United States and Canada. It was also incorporated into the imperial system, which was established by an act of Parliament in 1824. The imperial system was based on seven base units that could be derived from natural and traditional units. The inch remained as a derived unit in the imperial system, but it was no longer recommended for use in scientific and technical fields.

Usage of Inch

The inch is a unit of length that is used for measuring short distances and dimensions, such as the length of a nail or the width of a finger.

The inch is commonly used in everyday life, especially in countries that follow the US customary system. Some examples are:

• Measuring the size and shape of objects and tools.
• Measuring the height and weight of people and animals.
• Measuring the distance and time between places and events.
• Measuring clothing sizes and shoe sizes.

The inch is also used in some scientific and technical fields, such as:

• Measuring the diameter and circumference of circles and spheres.
• Measuring the thickness and density of materials.
• Measuring the pressure and temperature of gases and liquids.

How to Convert Inch to Other Units of Length in the US Customary System

To convert inch to other units of length in the US customary system, we need to know the relationship between inch and other units. Here are some common units and their equivalent values in inches:

• 1 foot = 12 inches
• 1 yard = 36 inches
• 1 mile = 63,360 inches
• 1 mil = 0.001 inch

To convert inch to any of these units, we need to multiply or divide by the appropriate factor. For example, to convert 10 inches to feet, we need to divide by 12:

10 inches / 12 = 0.833 feet

To convert 10 inches to miles, we need to divide by 63,360:

10 inches / 63,360 = 0.000158 miles

To convert 10 inches to mils, we need to multiply by 1000:

10 inches x 1000 = 10,000 mils

How to Convert Inch to Other Units of Length in the SI System

To convert inch to other units of length in the SI system, we need to know the relationship between inch and meter. One inch is equal to 0.0254 meters.

To convert inch to any other unit of length in the SI system, we need to multiply or divide by the appropriate power of ten and add a prefix. Here are some common units and their equivalent values in inches:

• 1 centimeter = 0.39370079 inches
• 1 millimeter = 0.039370079 inches
• 1 micrometer = 3.9370079 x 10^-5 inches

To convert inch to any of these units, we need to multiply by the appropriate factor and add a prefix. For example, to convert 10 inches to centimeters, we need to multiply by 2.54:

10 inches x 2.54 = 25.4 centimeters