

Convert Feet to Furlongs (ft to fur) ▶ Conversion Table
How to convert1 furlong (fur) = 660 foot (ft). Furlong (fur) is a unit of Length used in Standard system. Foot (ft) is a unit of Length used in Standard system. Furlong: A Unit of Length Used in the US Customary SystemThe furlong (fur) is a unit of length in the US customary system, which is one of the systems of measurement used in the United States and some other countries. The furlong is equal to 220 yards, which is an eighth of a mile. The furlong is also a derived unit in the imperial system, which is the official system of measurement for the United Kingdom and some other Commonwealth countries. The symbol for furlong is fur. The furlong is used for measuring long distances and areas, such as the length of a horse race or the area of a farm. The furlong is named after the furrowlong, which was the length of a furrow in one acre of a plowed open field in medieval England. In this article, we will explore the definition, history, usage and conversion of the furlong as a unit of length. Definition of the UnitThe furlong is a unit of length that is equal to 220 yards. It is defined as 1/8 miles. The mile is defined as 5,280 feet or 1,760 yards. The definition of the furlong has not changed since its origin in medieval England, as part of the old English system of measurement that was based on natural and traditional units. However, the definition of the mile has changed several times over time, as different standards and methods of measurement were developed by various countries and organizations. The current definition of the mile as based on feet and yards was agreed upon by an international treaty in 1959. History of the UnitThe origin of the furlong as a unit of length can be traced back to medieval England, when it was used as a measure of land area and distance. The word furlong comes from the Old English words furh (furrow) and lang (long), meaning furrowlong. It referred to the length of a furrow in one acre of a plowed open field, which was a common system of land division and cultivation at that time. The open field was divided into strips or selions, each strip being one furlong long and one rod wide. A rod was equal to 5.5 yards or 16.5 feet. An acre was equal to four rods by 40 rods, or 160 square rods. The furlong was also used as a measure of distance for horse racing and other sports. The standard length of a horse race was four furlongs, or half a mile. This was later increased to eight furlongs, or one mile, which became known as the classic distance for horse racing. The furlong was adopted by other countries that followed the English system of measurement, such as the United States and Canada. It was also incorporated into the imperial system, which was established by an act of Parliament in 1824. The imperial system was based on seven base units that could be derived from natural and traditional units. The furlong remained as a derived unit in the imperial system, but it was no longer recommended for use in scientific and technical fields. Usage of the UnitThe furlong is a unit of length that is used for measuring long distances and areas, such as the length of a horse race or the area of a farm. The furlong is commonly used in horse racing, especially in North America and some other countries that follow the US customary system. Some examples are:
The furlong is also used in agriculture, especially in rural areas where farms are still measured by acres and furlongs. Some examples are:
How to ConvertThe furlong can be converted to other units of length by using conversion factors or formulas. Here are some examples of how to convert furlongs to other units of length in the US customary system, the SI system and other systems:
Foot: A Unit of Length Used in the US Customary SystemThe foot (ft) is a unit of length used in the US customary system, which is one of the systems of measurement used in the United States and some other countries. The foot is equal to 12 inches or 0.3048 meter. The foot is also a derived unit in the imperial system, which is the official system of measurement for the United Kingdom and some other Commonwealth countries. The symbol for foot is ft or ′. The foot is used for measuring short distances and dimensions, such as the height of a person or the width of a door. The foot is named after the human foot, which was used as a standard of measurement in ancient times. In this article, we will explore the definition, history, usage and conversion of the foot as a unit of length. Definition of FootThe foot is a unit of length that is equal to 12 inches. It is defined as 0.3048 meter by international agreement in 1959. One inch is equal to 25.4 millimeters. The definition of the foot has changed over time, as different standards and methods of measurement were developed by various countries and organizations. The current definition of the foot as based on the meter was agreed upon by an international treaty in 1959. History of FootThe origin of the foot as a unit of length can be traced back to ancient times, when it was used as a measure of length based on the human body. The word foot comes from the Old English word fot, which was derived from the ProtoGermanic word fotuz. It referred to the length of a human foot, which was about 280 millimeters. The foot was also used as a measure of length by other civilizations, such as the Romans, who used it as onesixteenth of a Roman pace or passus. The Roman foot was about 296 millimeters. The foot was adopted by other countries that followed the English system of measurement, such as the United States and Canada. It was also incorporated into the imperial system, which was established by an act of Parliament in 1824. The imperial system was based on seven base units that could be derived from natural and traditional units. The foot remained as a derived unit in the imperial system, but it was no longer recommended for use in scientific and technical fields. Where Foot is UsedThe foot is a unit of length that is used for measuring short distances and dimensions, such as the height of a person or the width of a door. The foot is commonly used in everyday life, especially in countries that follow the US customary system. Some examples are:
Foot Equivalents in Other Units and ScalesThe foot (ft) is a unit of length used in the US customary system, which is one of the systems of measurement used in the United States and some other countries. The foot is equal to 12 inches or 0.3048 meter. The foot is also a derived unit in the imperial system, which is the official system of measurement for the United Kingdom and some other Commonwealth countries. The symbol for foot is ft or ′. The foot is used for measuring short distances and dimensions, such as the height of a person or the width of a door. The foot is named after the human foot, which was used as a standard of measurement in ancient times. In this article, we will explore how to convert foot to other units of length in the US customary system and the SI system. We will also provide 10 examples of conversion for each system. How to Convert Foot to Other Units of Length in the US Customary SystemThe US customary system is a system of measurement that uses units such as inch, yard, mile, ounce, pound, gallon, etc. The US customary system is based on the English system of measurement that was used before the adoption of the metric system. To convert foot to other units of length in the US customary system, we need to know the relationship between foot and other units. Here are some common units and their equivalent values in feet: To convert foot to any of these units, we need to multiply or divide by the appropriate factor. For example, to convert 10 feet to inches, we need to multiply by 12: 10 feet x 12 = 120 inches To convert 10 feet to miles, we need to divide by 5280: 10 feet / 5280 = 0.00189 miles To convert 10 feet to fathoms, we need to divide by 6: 10 feet / 6 = 1.667 fathoms To convert 10 feet to rods, we need to divide by 16.5: 10 feet / 16.5 = 0.606 rods How to Convert Foot to Other Units of Length in the SI SystemThe SI system (or International System of Units) is a system of measurement that uses units such as meter, kilogram, second, ampere, kelvin, mole, candela, etc. The SI system is based on the metric system that was developed in France in the late 18th century. To convert foot to other units of length in the SI system, we need to know the relationship between foot and meter. The meter is the base unit of length in the SI system and it is defined as “the length of the path travelled by light in vacuum during a time interval of 1/299792458 seconds.” One foot is equal to 0.3048 meters. To convert foot to any other unit of length in the SI system, we need to multiply or divide by the appropriate power of ten and add a prefix. Here are some common units and their equivalent values in meters: To convert foot to any of these units, we need to multiply by the appropriate factor and add a prefix. Español Russian Français 
Feet to Centimeters Feet to Decimeters Feet to Inches Feet to Kilometers Feet to Meters Feet to Miles Feet to Millimeters Feet to Yards Centimeters to Inches Feet to Inches Feet to Kilometers Feet to Meters Feet to Yards Inches to Centimeters Inches to Feet Inches to Meters Inches to Millimeters Kilometers to Miles Meters to Feet Meters to Inches Meters to Yards Miles to Kilometers Millimeters to Inches Yards to Feet Yards to Inches Yards to Meters 
About Us Contact Terms of Service 