Feet to Microns
Converter

Conversion Table

How to convert

1 foot (ft) = 304800 micron (µ). Foot (ft) is a unit of Length used in Standard system. Micron (µ) is a unit of Length used in Metric system.

Foot: A Unit of Length Used in the US Customary System

The foot (ft) is a unit of length used in the US customary system, which is one of the systems of measurement used in the United States and some other countries. The foot is equal to 12 inches or 0.3048 meter. The foot is also a derived unit in the imperial system, which is the official system of measurement for the United Kingdom and some other Commonwealth countries. The symbol for foot is ft or ′. The foot is used for measuring short distances and dimensions, such as the height of a person or the width of a door. The foot is named after the human foot, which was used as a standard of measurement in ancient times. In this article, we will explore the definition, history, usage and conversion of the foot as a unit of length.

Definition of Foot

The foot is a unit of length that is equal to 12 inches. It is defined as 0.3048 meter by international agreement in 1959. One inch is equal to 25.4 millimeters.

The definition of the foot has changed over time, as different standards and methods of measurement were developed by various countries and organizations. The current definition of the foot as based on the meter was agreed upon by an international treaty in 1959.

History of Foot

The origin of the foot as a unit of length can be traced back to ancient times, when it was used as a measure of length based on the human body. The word foot comes from the Old English word fot, which was derived from the Proto-Germanic word fotuz. It referred to the length of a human foot, which was about 280 millimeters.

The foot was also used as a measure of length by other civilizations, such as the Romans, who used it as one-sixteenth of a Roman pace or passus. The Roman foot was about 296 millimeters.

The foot was adopted by other countries that followed the English system of measurement, such as the United States and Canada. It was also incorporated into the imperial system, which was established by an act of Parliament in 1824. The imperial system was based on seven base units that could be derived from natural and traditional units. The foot remained as a derived unit in the imperial system, but it was no longer recommended for use in scientific and technical fields.

Where Foot is Used

The foot is a unit of length that is used for measuring short distances and dimensions, such as the height of a person or the width of a door.

The foot is commonly used in everyday life, especially in countries that follow the US customary system. Some examples are:

• Measuring the size and shape of objects and tools.
• The construction industry uses foot as a unit of measurement for various purposes, such as planning, designing, building, and estimating.
• The aviation industry uses foot as a unit of measurement for altitude (the height above sea level) and flight level.
• The surveying industry uses foot as a unit of measurement for land area and distance.
The construction industry uses foot as a unit of measurement for various purposes, such as planning, designing, building, and estimating materials and costs.


Foot Equivalents in Other Units and Scales

The foot (ft) is a unit of length used in the US customary system, which is one of the systems of measurement used in the United States and some other countries. The foot is equal to 12 inches or 0.3048 meter. The foot is also a derived unit in the imperial system, which is the official system of measurement for the United Kingdom and some other Commonwealth countries. The symbol for foot is ft or ′. The foot is used for measuring short distances and dimensions, such as the height of a person or the width of a door. The foot is named after the human foot, which was used as a standard of measurement in ancient times.

In this article, we will explore how to convert foot to other units of length in the US customary system and the SI system. We will also provide 10 examples of conversion for each system.

How to Convert Foot to Other Units of Length in the US Customary System

The US customary system is a system of measurement that uses units such as inch, yard, mile, ounce, pound, gallon, etc. The US customary system is based on the English system of measurement that was used before the adoption of the metric system.

To convert foot to other units of length in the US customary system, we need to know the relationship between foot and other units. Here are some common units and their equivalent values in feet:

• 1 inch = 1/12 foot
• 1 yard = 3 feet
• 1 mile = 5280 feet
• 1 fathom = 6 feet
• 1 rod = 16.5 feet

To convert foot to any of these units, we need to multiply or divide by the appropriate factor. For example, to convert 10 feet to inches, we need to multiply by 12:

10 feet x 12 = 120 inches

To convert 10 feet to miles, we need to divide by 5280:

10 feet / 5280 = 0.00189 miles

To convert 10 feet to fathoms, we need to divide by 6:

10 feet / 6 = 1.667 fathoms

To convert 10 feet to rods, we need to divide by 16.5:

10 feet / 16.5 = 0.606 rods

How to Convert Foot to Other Units of Length in the SI System

The SI system (or International System of Units) is a system of measurement that uses units such as meter, kilogram, second, ampere, kelvin, mole, candela, etc. The SI system is based on the metric system that was developed in France in the late 18th century.

To convert foot to other units of length in the SI system, we need to know the relationship between foot and meter. The meter is the base unit of length in the SI system and it is defined as “the length of the path travelled by light in vacuum during a time interval of 1/299792458 seconds.” One foot is equal to 0.3048 meters.

To convert foot to any other unit of length in the SI system, we need to multiply or divide by the appropriate power of ten and add a prefix. Here are some common units and their equivalent values in meters:

• 1 kilometer = 1000 meters
• 1 centimeter = 0.01 meter
• 1 millimeter = 0.001 meter
• 1 micrometer = 0.000001 meter
• 1 nanometer = 0.000000001 meter

To convert foot to any of these units, we need to multiply by the appropriate factor and add a prefix.

Micron: A Unit of Length

A micron is a unit of length that is equal to one millionth of a meter. It is also known as a micrometer or a micrometre. The symbol for micron is µm.

How to Convert Micron

To convert micron to other units of length, we need to use some conversion factors. Here are some common conversion factors for US Standard system and SI system:

• 1 inch = 25,400 µm
• 1 foot = 304,800 µm
• 1 mile = 1,609,344,000 µm
• 1 centimeter = 10,000 µm
• 1 meter = 1,000,000 µm
• 1 kilometer = 1,000,000,000 µm

Using these conversion factors, we can multiply or divide the number of microns by the appropriate factor to get the equivalent length in another unit. For example:

• To convert 50 µm to inches, we divide 50 by 25,400 and get 0.00197 inches.
• To convert 3 feet to microns, we multiply 3 by 304,800 and get 914,400 µm.

Where Micron is Used

The micron is used in various fields and applications that require measuring very small distances or sizes. Some examples are:

• In biology and medicine, the micron is used to measure the size of cells, bacteria, viruses, and other microscopic organisms.
• In engineering and manufacturing, the micron is used to measure the thickness of films, coatings, wires, fibers, and other materials.
• In astronomy and optics, the micron is used to measure the wavelength of infrared light and the resolution of telescopes and cameras.
• In geology and mineralogy, the micron is used to measure the grain size of rocks and minerals.
• In chemistry and physics, the micron is used to measure the diameter of atoms and molecules.

The use of micron varies by country and region. For example:

• In the United States and Canada, the micron is commonly used in engineering and manufacturing industries.
• In Europe and Asia, the micron is widely used in science and technology fields.
• In Australia and New Zealand, the micron is often used in agriculture and forestry sectors.

Definition of the Micron

The micron is defined as one millionth of a meter. A meter is the base unit of length in the SI system. The SI system is an international system of units that is based on seven fundamental quantities: length, mass, time, electric current, temperature, luminous intensity, and amount of substance.

The meter was originally defined as one ten-millionth of the distance from the equator to the North Pole along a meridian. However, this definition was not very precise and practical. Therefore, over time, the definition of the meter has changed several times based on different physical constants and standards. The current definition of the meter was adopted in 1983 by the General Conference on Weights and Measures (CGPM). It states that:

The meter is the length of the path travelled by light in vacuum during a time interval of 1/299792458 second.

Using this definition, we can derive that one micron is equal to:

1 µm = (1/299792458) / (1000000) second * (299792458 m / second)

= (1/1000000) m

= 0.000001 m

History of Micron

The micron was first introduced in the late 18th century by French scientists who were developing a decimal system of units. They proposed a unit called micrometre that was equal to one millionth of a meter. However, this unit was not widely accepted or used at that time.

In the early 19th century, British scientists adopted a similar unit called microinch that was equal to one millionth of an inch. This unit was more popular among English-speaking countries and regions.

In the late 19th century, German scientists proposed a new unit called mikrometer that was also equal to one millionth of a meter. This unit was more consistent with the metric system and became more widely used in Europe and Asia.

In the early 20th century, the International Bureau of Weights and Measures (BIPM) recommended using the term micrometer instead of micron or mikrometer to avoid confusion with other units. However, many people still preferred using micron as a shorter and simpler name.

In 1960, the CGPM adopted the SI system as the official system of units for science and technology. The SI system used the term micrometer as the official name for the unit of length equal to one millionth of a meter. The symbol for micrometer was also standardized as µm.

However, the term micron and its symbol µ were still widely used in many fields and applications. Therefore, in 1975, the CGPM decided to allow the use of micron and µ as alternative names and symbols for micrometer and µm. However, they also stated that these alternatives should be avoided in official documents and publications.

Example Conversions of Micron to Other Units

Here are some examples of converting micron to other units of length:

• 1 µm = 0.000001 m
• 1 µm = 0.001 mm
• 1 µm = 0.00003937 inch
• 1 µm = 0.000003281 foot
• 1 µm = 0.000000001 km
• 1 µm = 0.0000006214 mile
• 1 µm = 1000 nm