Conversion Table

How to convert

1 foot (ft) = 5.48596E-05 league (league). Foot (ft) is a unit of Length used in Standard system. League (league) is a unit of Length used in Standard system.

Foot: A Unit of Length Used in the US Customary System

The foot (ft) is a unit of length used in the US customary system, which is one of the systems of measurement used in the United States and some other countries. The foot is equal to 12 inches or 0.3048 meter. The foot is also a derived unit in the imperial system, which is the official system of measurement for the United Kingdom and some other Commonwealth countries. The symbol for foot is ft or ′. The foot is used for measuring short distances and dimensions, such as the height of a person or the width of a door. The foot is named after the human foot, which was used as a standard of measurement in ancient times. In this article, we will explore the definition, history, usage and conversion of the foot as a unit of length.

Definition of Foot

The foot is a unit of length that is equal to 12 inches. It is defined as 0.3048 meter by international agreement in 1959. One inch is equal to 25.4 millimeters.

The definition of the foot has changed over time, as different standards and methods of measurement were developed by various countries and organizations. The current definition of the foot as based on the meter was agreed upon by an international treaty in 1959.

History of Foot

The origin of the foot as a unit of length can be traced back to ancient times, when it was used as a measure of length based on the human body. The word foot comes from the Old English word fot, which was derived from the Proto-Germanic word fotuz. It referred to the length of a human foot, which was about 280 millimeters.

The foot was also used as a measure of length by other civilizations, such as the Romans, who used it as one-sixteenth of a Roman pace or passus. The Roman foot was about 296 millimeters.

The foot was adopted by other countries that followed the English system of measurement, such as the United States and Canada. It was also incorporated into the imperial system, which was established by an act of Parliament in 1824. The imperial system was based on seven base units that could be derived from natural and traditional units. The foot remained as a derived unit in the imperial system, but it was no longer recommended for use in scientific and technical fields.

Where Foot is Used

The foot is a unit of length that is used for measuring short distances and dimensions, such as the height of a person or the width of a door.

The foot is commonly used in everyday life, especially in countries that follow the US customary system. Some examples are:

• Measuring the size and shape of objects and tools.
• The construction industry uses foot as a unit of measurement for various purposes, such as planning, designing, building, and estimating.
• The aviation industry uses foot as a unit of measurement for altitude (the height above sea level) and flight level.
• The surveying industry uses foot as a unit of measurement for land area and distance.
The construction industry uses foot as a unit of measurement for various purposes, such as planning, designing, building, and estimating materials and costs.


Foot Equivalents in Other Units and Scales

The foot (ft) is a unit of length used in the US customary system, which is one of the systems of measurement used in the United States and some other countries. The foot is equal to 12 inches or 0.3048 meter. The foot is also a derived unit in the imperial system, which is the official system of measurement for the United Kingdom and some other Commonwealth countries. The symbol for foot is ft or ′. The foot is used for measuring short distances and dimensions, such as the height of a person or the width of a door. The foot is named after the human foot, which was used as a standard of measurement in ancient times.

In this article, we will explore how to convert foot to other units of length in the US customary system and the SI system. We will also provide 10 examples of conversion for each system.

How to Convert Foot to Other Units of Length in the US Customary System

The US customary system is a system of measurement that uses units such as inch, yard, mile, ounce, pound, gallon, etc. The US customary system is based on the English system of measurement that was used before the adoption of the metric system.

To convert foot to other units of length in the US customary system, we need to know the relationship between foot and other units. Here are some common units and their equivalent values in feet:

• 1 inch = 1/12 foot
• 1 yard = 3 feet
• 1 mile = 5280 feet
• 1 fathom = 6 feet
• 1 rod = 16.5 feet

To convert foot to any of these units, we need to multiply or divide by the appropriate factor. For example, to convert 10 feet to inches, we need to multiply by 12:

10 feet x 12 = 120 inches

To convert 10 feet to miles, we need to divide by 5280:

10 feet / 5280 = 0.00189 miles

To convert 10 feet to fathoms, we need to divide by 6:

10 feet / 6 = 1.667 fathoms

To convert 10 feet to rods, we need to divide by 16.5:

10 feet / 16.5 = 0.606 rods

How to Convert Foot to Other Units of Length in the SI System

The SI system (or International System of Units) is a system of measurement that uses units such as meter, kilogram, second, ampere, kelvin, mole, candela, etc. The SI system is based on the metric system that was developed in France in the late 18th century.

To convert foot to other units of length in the SI system, we need to know the relationship between foot and meter. The meter is the base unit of length in the SI system and it is defined as “the length of the path travelled by light in vacuum during a time interval of 1/299792458 seconds.” One foot is equal to 0.3048 meters.

To convert foot to any other unit of length in the SI system, we need to multiply or divide by the appropriate power of ten and add a prefix. Here are some common units and their equivalent values in meters:

• 1 kilometer = 1000 meters
• 1 centimeter = 0.01 meter
• 1 millimeter = 0.001 meter
• 1 micrometer = 0.000001 meter
• 1 nanometer = 0.000000001 meter

To convert foot to any of these units, we need to multiply by the appropriate factor and add a prefix.

League: A Unit of Length

The league is an old unit of length that was common in Europe and Latin America, but is no longer official in any nation. It was derived from an ancient Celtic unit and adopted by the Romans. It was the distance a person or a horse could walk in about one hour, usually about 3 to 5 kilometers. The league varied in length from 2.4 to 4.6 statute miles in different regions.

In this article, we will explore the definition, history, usage and conversion of the league as a unit of length.

Definition of the League

The league is a unit of length that is equal to 3 miles or 4.8 kilometers in the English-speaking countries. However, the word league often refers to the Spanish, Portuguese or French league, which have different values.

The Spanish league was originally defined as 5,000 varas (a Spanish yard), about 2.6 miles or 4.2 kilometers. The Portuguese league was also 5,000 varas, but the vara was slightly longer, making the league about 2.7 miles or 4.4 kilometers. The French league was based on the nautical mile and was equal to 3 nautical miles or 5.6 kilometers.

The league is not a standard unit and has no symbol.

History of the League

The origin of the league as a unit of length can be traced back to ancient times, when it was used as a measure of distance based on the human or animal pace. The word league comes from the Latin word leuga, which was derived from the Celtic word leuca. It referred to the distance that could be covered by a person or a horse in one hour.

The league was used by the Romans, who defined it as one and a half Roman miles (7,500 Roman feet or 2.2 kilometers). The Roman league was also called leuga Gallica (the Gaulish league) or leuga Germanica (the Germanic league), depending on the region.

The league was adopted by other countries that followed the Roman system of measurement, such as Spain, Portugal and France. It varied in length from country to country and from time to time, depending on local standards and methods of measurement.

The league was abolished by Philip II of Spain in 1568, but it continued to be used unofficially in some parts of Latin America. The league was also incorporated into the imperial system of measurement, which was established by an act of Parliament in 1824. The imperial system was based on seven base units that could be derived from natural and traditional units. The league remained as a derived unit in the imperial system, but it was no longer recommended for use in scientific and technical fields.

Usage of the League

The league is a unit of length that is used for measuring long distances and dimensions, such as the length of a road or the circumference of a lake.

The league is rarely used in modern times, except for historical or literary purposes. However, some countries still use it for some specific applications.

For example:

• In Argentina, a league is equal to 5 kilometers and is used for measuring land area.
• In Brazil, a league is equal to 6 kilometers and is used for measuring distances on roads and highways.
• In Mexico, a league is variable and depends on the terrain and the mode of transportation. It is used for measuring distances between towns and villages.
• In France, a league is equal to 4 kilometers and is used for measuring distances on maps and signs.
• In Spain, a league is equal to 4 kilometers and is used for measuring distances on roads and highways.

Example Conversions of League to Other Units

The league can be converted to other units of length by using different factors and formulas. Here are some examples of conversion for different types of leagues:

• To convert an English league to miles, multiply by 3:

1 English league x 3 = 3 miles

• To convert an English league to kilometers, multiply by 4.8:

1 English league x 4.8 = 4.8 kilometers

• To convert a Spanish league to miles, multiply by 2.6:

1 Spanish league x 2.6 = 2.6 miles

• To convert a Spanish league to kilometers, multiply by 4.2:

1 Spanish league x 4.2 = 4.2 kilometers

• To convert a Portuguese league to miles, multiply by 2.7:

1 Portuguese league x 2.7 = 2.7 miles

• To convert a Portuguese league to kilometers, multiply by 4.4:

1 Portuguese league x 4.4 = 4.4 kilometers

• To convert a French league to miles, multiply by 3.5:

1 French league x 3.5 = 3.5 miles

• To convert a French league to kilometers, multiply by 5.6:

1 French league x 5.6 = 5.6 kilometers

• To convert a mile to leagues, divide by the appropriate factor:

1 mile / 3 = 0.333 English leagues

1 mile / 2.6 = 0.385 Spanish leagues

1 mile / 2.7 = 0.370 Portuguese leagues

1 mile / 3.5 = 0.286 French leagues

• To convert a kilometer to leagues, divide by the appropriate factor:

1 kilometer / 4.8 = 0.208 English leagues

1 kilometer / 4.2 = 0.238 Spanish leagues

1 kilometer / 4.4 = 0.227 Portuguese leagues

1 kilometer / 5.6 = 0.179 French leagues