Feet Per Hour to Knots
Converter

Conversion Table

How to convert

1 foot per hour (ft/h) = 0.000164579 knot (kt). Foot Per Hour (ft/h) is a unit of Speed used in Standard system. Knot (kt) is a unit of Speed used in Standard system.

Feet Per Hour

Definition of Feet Per Hour

Feet per hour (f/h) is a unit of speed that measures how fast something is moving in terms of feet per unit of time. It is a US Standard unit that is derived from the base unit of length, the foot, and the base unit of time, the hour. It is rarely used however, as the units of feet per second and miles per hour are considered sufficient for most situations.

One foot per hour is equal to 0.000084666666666667 meters per second, or 0.0003048 kilometers per hour. It can also be converted to other units of speed, such as miles per hour, knots, or meters per second, by using appropriate conversion factors.

How to Convert Feet Per Hour

To convert feet per hour to other units of speed, we need to multiply or divide by the corresponding conversion factors. For example, to convert feet per hour to miles per hour, we need to multiply by 0.0001893939394, since there are 0.0001893939394 miles in one foot. To convert feet per hour to meters per second, we need to multiply by 0.000084666666666667, since there are 0.000084666666666667 meters in one foot.

Here are some examples of how to convert feet per hour to other units of length in the US Standard system and the SI system:

• To convert 10 f/h to miles per hour (mph), we multiply by 0.0001893939394: 10 f/h x 0.0001893939394 = 0.001893939394 mph
• To convert 20 f/h to feet per second (fps), we divide by 3600, since there are 3600 seconds in one hour: 20 f/h / 3600 = 0.005555555556 fps
• To convert 30 f/h to knots (kn), we multiply by 0.0001645788337, since there are 0.0001645788337 nautical miles in one foot: 30 f/h x 0.0001645788337 = 0.004937365011 kn
• To convert 40 f/h to meters per second (m/s), we multiply by 0.000084666666666667: 40 f/h x 0.000084666666666667 = 0.003386666667 m/s
• To convert 50 f/h to meters per minute (m/min), we multiply by 0.00508, since there are 0.00508 meters in one foot: 50 f/h x 0.00508 = 0.254 m/min
• To convert 60 f/h to centimeters per second (cm/s), we multiply by 100, since there are 100 centimeters in one meter, and multiply by 0.000084666666666667: 60 f/h x 100 x 0.000084666666666667 = 0.508 cm/s

Where Feet Per Hour Are Used

Feet per hour are mainly used for measuring very slow speeds or velocities of objects or phenomena that move in terms of feet per unit of time. They are often used in scientific fields such as geology, biology, astronomy, and physics, where the speed or velocity of an object or phenomenon is very small compared to the usual units of speed.

For example, a glacier may have a speed of a few feet per hour, which means that it moves a few feet in one hour. A snail may have a speed of up to 47 feet per hour, which means that it can travel up to 47 feet in one hour.1 A planet may have an orbital velocity of thousands of feet per hour, which means that it covers thousands of feet along its orbit in one hour.

Feet per hour are also used in some other fields where the speed or velocity of an object or phenomenon is measured in terms of feet per unit of time.

History of Feet Per Hour

The origin of feet per hour as a unit of speed can be traced back to the development of the US Standard system and the foot as a unit of length in the late eighteenth century. The foot was defined as one third of a yard based on the English standard foot.

The term foot first appeared in English in the late fourteenth century, but it was not until later in the early nineteenth century that the use of feet per hour became more common; before that, other units such as inches per hour or yards per hour were preferred for expressing speed.

Feet per hour have been used ever since as a standard unit of speed for measuring very slow speeds or velocities of objects or phenomena that move in terms of feet per unit of time. They have also been adopted by some international organizations and conventions, such as the International System of Units and the International Astronomical Union.

Example Conversions of Feet Per Hour to Other Units

Here are some examples of how to convert feet per hour to other units of speed, using the conversion factors given above:

• To convert 100 f/h to miles per hour, we multiply by 0.0001893939394: 100 f/h x 0.0001893939394 = 0.01893939394 mph
• To convert 200 f/h to feet per second, we divide by 3600: 200 f/h / 3600 = 0.05555555556 fps
• To convert 300 f/h to knots, we multiply by 0.0001645788337: 300 f/h x 0.0001645788337 = 0.04937365011 kn
• To convert 400 f/h to meters per second, we multiply by 0.000084666666666667: 400 f/h x 0.000084666666666667 = 0.03386666667 m/s
• To convert 500 f/h to meters per minute, we multiply by 0.00508: 500 f/h x 0.00508 = 2.54 m/min
• To convert 600 f/h to centimeters per second, we multiply by 100 and multiply by 0.000084666666666667: 600 f/h x 100 x 0.000084666666666667 = 5.08 cm/s
• To convert 700 f/h to millimeters per minute, we multiply by 1000, since there are 1000 millimeters in one meter, and multiply by 0.00508: 700 f/h x 1000 x 0.00508 = 3556 mm/min

Knots

Definition of Knots

Knots, commonly denoted kn, is a unit of speed equal to one nautical mile per hour, exactly 1.852 km/h (approximately 1.151 mph or 0.514 m/s). It is the standard unit of speed used in meteorology, and in maritime and air navigation. A vessel travelling at 1 kn along a meridian travels approximately one minute of geographic latitude in one hour.

How to Convert Knots

To convert knots to other units of speed, we need to multiply or divide by the corresponding conversion factors. For example, to convert knots to kilometers per hour, we need to multiply by 1.852, since there are 1.852 kilometers in one nautical mile. To convert knots to meters per second, we need to divide by 3.6, since there are 3.6 seconds in one hour.

Here are some examples of how to convert knots to other units of length in the US Standard system and the SI system:

• To convert 10 kn to kilometers per hour (km/h), we multiply by 1.852: 10 kn x 1.852 = 18.52 km/h
• To convert 20 kn to miles per hour (mph), we multiply by 1.1507794480235, since there are 1.1507794480235 miles in one nautical mile: 20 kn x 1.1507794480235 = 23.01558896047 mph
• To convert 30 kn to feet per second (fps), we multiply by 1.6878098571012, since there are 1.6878098571012 feet in one meter: 30 kn x 1.6878098571012 = 50.634295713036 fps
• To convert 40 kn to meters per second (m/s), we divide by 3.6: 40 kn / 3.6 = 11.111111111111 m/s
• To convert 50 kn to meters per minute (m/min), we multiply by 60, since there are 60 minutes in one hour: 50 kn x 60 = 3,000 m/min
• To convert 60 kn to centimeters per second (cm/s), we multiply by 100, since there are 100 centimeters in one meter, and divide by 3.6: 60 kn x 100 / 3.6 = 5,000 cm/s

Where Knots Are Used

Knots are used in various fields of science and technology where the speed and direction of movement of objects or phenomena are measured or applied in relation to water or air currents. For example:

• In meteorology, knots are used to measure wind speed and direction, as well as the speed and direction of storms, hurricanes, and other weather phenomena.
• In maritime navigation, knots are used to measure the speed and direction of ships, boats, submarines, and other watercraft, as well as the speed and direction of ocean currents, tides, and waves.
• In air navigation, knots are used to measure the speed and direction of aircraft, helicopters, rockets, satellites, and other aerospace vehicles, as well as the speed and direction of air currents, jet streams, and wind shear.

History of Knots

The origin of knots as a unit of speed can be traced back to the ancient practice of measuring the speed of ships by using a device called a chip log or log-line. This device consisted of a wooden board attached to a rope with knots tied at regular intervals along its length. The board was thrown overboard from the stern of the ship and allowed to drag behind it while the rope was let out for a fixed amount of time (usually measured by a sandglass). The number of knots that passed over the rail of the ship during that time indicated the speed of the ship in nautical miles per hour.

The first recorded use of this method was by the Phoenicians around the second millennium BCE. The device was later improved and standardized by various civilizations such as the Greeks, Romans, Arabs, Vikings, Chinese, and Europeans. The length of the nautical mile and the spacing of the knots varied from place to place and from time to time until they were fixed by international agreement in the late nineteenth century.

The term knot was derived from the Old English word cnotta meaning “a knot”. It was first used as a unit of speed by English sailors in the early seventeenth century.

Example Conversions of Knots to Other Units

Here are some examples of how to convert knots to other units of speed, using the conversion factors given above:

• To convert 100 kn to kilometers per hour, we multiply by 1.852: 100 kn x 1.852 = 185.2 km/h
• To convert 200 kn to miles per hour, we multiply by 1.1507794480235: 200 kn x 1.1507794480235 = 230.15589792094 mph
• To convert 300 kn to feet per second, we multiply by 1.6878098571012: 300 kn x 1.6878098571012 = 506.34295713011 fps
• To convert 400 kn to meters per second, we divide by 3.6: 400 kn / 3.6 = 111.11111111111 m/s
• To convert 500 kn to meters per minute, we multiply by 60: 500 kn x 60 = 30,000 m/min
• To convert 600 kn to centimeters per second, we multiply by 100 and divide by 3.6: 600 kn x 100 / 3.6 = 50,000 cm/s
• To convert 700 kn to millimeters per minute, we multiply by 1000, since there are 1000 millimeters in one meter, and multiply by 60: 700 kn x 1000 x 60 = 42,000,000 mm/min