Chains to Micrometers
Converter

Conversion Table

How to convert

1 chain (ch) = 20116800 micrometer (µm). Chain (ch) is a unit of Length used in Standard system. Micrometer (µm) is a unit of Length used in Metric system.

Chain: A Unit of Length Used for Measuring Land

The chain is a unit of length that is equal to 66 feet or 22 yards or 4 rods or 100 links. It is part of the US customary and imperial measurement systems. It is used for measuring land, especially in surveying and mapping. The symbol for chain is ch. There are 10 chains in a furlong, and 80 chains in one statute mile. An acre is the area of 10 square chains. The unit is named after the chain, a measuring device that was invented by Edmund Gunter, a clergyman and mathematician, in the 17th century. The chain is also sometimes called a Gunter’s chain, a surveyor’s chain or a land chain. In this article, we will explore the definition, history, usage and conversion of the chain as a unit of length.

Definition of the Unit

The chain is a unit of length that is equal to 66 feet or 22 yards or 4 rods or 100 links. It is one of the base units in the US customary and imperial measurement systems, along with the foot, the yard and the mile. The chain is also a derived unit in the International System of Units (SI), which is the most widely used system of measurement in the world. The SI base unit of length is the meter, which is defined as the length of the path travelled by light in vacuum during a time interval of 1/299792458 seconds.

The definition of the chain has not changed since its introduction by Edmund Gunter in 1620, who based it on an earlier English unit called an acre’s breadth, which was equal to one-tenth of a furlong or one-eightieth of a mile. However, the definition of the foot, which is used to define the chain, has changed several times over time, as different standards and methods of measurement were adopted by various countries and regions. The current definition of the foot as 0.3048 meter was agreed upon by an international treaty in 1959.

History of the Unit

The origin of the chain as a unit of length can be traced back to 1620, when Edmund Gunter created a measuring device called a chain. The chain was 66 feet long and consisted of 100 metal links connected by three rings each. The links were made of thick wire with a loop at each end. The chain had brass handles at each end for holding and folding. Gunter chose this unit because it was convenient for his work on surveying and mapping land. He also named this unit after himself, as he wrote in his book: "I have taken as unit for these measurements one hundredth part [of a furlong], which I will call an Chain".

Gunter’s unit was soon adopted by other surveyors and mapmakers, who found it useful for measuring distances and areas on flat or gently sloping land. The chain was also used for laying out roads, railways and canals. The chain became part of the US customary and imperial measurement systems, which were based on earlier English units that were brought by British settlers to America. The chain was also used in some other countries influenced by British practice, such as Canada and India.

In 1785, when the United States Congress passed the Land Ordinance Act to survey and divide the public land west of the Appalachian Mountains into rectangular townships and sections, the use of the chain as a unit of measurement was mandated by law. The act also defined the chain as equal to four rods or poles or perches. The surveyors who carried out this work were known as "chain bearers" or "chain carriers", and they marked each mile along their survey lines with wooden posts called "milestones".

In 1959, when the United States, Canada, the United Kingdom and some other Commonwealth countries agreed to adopt a common definition of the foot as 0.3048 meter, based on the international yard that was defined as 0.9144 meter by an international treaty in 1959, the chain became exactly equal to 20.1168 meters.

Usage of the Unit

The chain is a unit of length that is used for measuring land, especially in surveying and mapping. The chain is also used for measuring distances on roads, railways and canals. The chain is still used in some rural areas and historical contexts in the United States, Canada and some other countries that follow the US customary or imperial measurement systems.

The chain is used for various purposes, such as:

• Measuring length, width and area of land parcels and properties.
• Measuring distances and dimensions on maps and plans.
• Measuring boundaries and borders between states, counties and townships.
• Measuring road widths and lengths.
• Measuring railway track gauges and lengths.
• Measuring canal widths and depths.

How to Convert

The chain can be converted to other units of length by using conversion factors or formulas. Here are some examples of how to convert chains to other units of length in the US customary system, the imperial system and the SI system:

• To convert chains to feet, multiply by 66. For example, 10 ch = 10 × 66 = 660 ft.
• To convert chains to yards, multiply by 22. For example, 10 ch = 10 × 22 = 220 yd.
• To convert chains to miles, divide by 80. For example, 10 ch = 10 / 80 = 0.125 mi.
• To convert chains to centimeters, multiply by 2011.68. For example, one ch = one × 2011.68 = 2011.68 cm.
• To convert chains to meters, multiply by 20.1168. For example, one ch = one × 20.1168 = 20.1168 m.
• To convert chains to kilometers, divide by 49.7097. For example, 10 ch = 10 / 49.7097 = 0.2012 km.

Equivalents in Other Units and Scales

The chain can be expressed in terms of other units of length by using equivalent values or ratios. Here are some examples of how to express chains in other units of length:

• One chain is equal to four rods or poles or perches.
• One chain is equal to one-tenth of a furlong or one-eightieth of a mile.
• One chain is equal to one-hundredth of a league or one-fortieth of a league (US).
• One chain is equal to one-hundred-millionth of an astronomical unit or one-forty-billionth of a light-year.
• One chain is equal to one-thousandth of a nautical mile or one-three-thousand-six-hundredth of a degree of latitude or longitude.

Micrometer: A Unit of Length

Definition of the micrometer

The micrometer, also known as the micron, is a unit of length in the International System of Units (SI) that equals one millionth of a meter. Its symbol is µm.

History of the micrometer

The term micron and the symbol µ were officially accepted for use in isolation to denote the micrometer in 1879, but officially revoked by the International System of Units (SI) in 1967. This became necessary because the older usage was incompatible with the official adoption of the unit prefix micro-, denoted µ, during the creation of the SI in 1960. In the SI, the systematic name micrometre became the official name of the unit, and µm became the official unit symbol.

How to convert micrometer

The micrometer can be converted to other units of length using simple multiplication or division by powers of 10. For example, one micrometer is equal to 0.001 millimeters, 0.000001 meters, or 0.000000001 kilometers in the SI system. One micrometer is also equal to 0.000039 inches, 0.0000033 feet, or 0.00000062 miles in the US standard system.

Where micrometer is used

The micrometer is a common unit of measurement for wavelengths of infrared radiation as well as sizes of biological cells and bacteria, and for grading wool by the diameter of the fibers. The width of a single human hair ranges from approximately 20 to 200 µm

The micrometer is used in different countries and applications for various purposes. For example:

• In Canada, the micrometer is used to measure air quality by monitoring the concentration of particulate matter (PM) in the atmosphere. PM2.5 refers to particles that are less than 2.5 micrometers in diameter, which can penetrate deep into the lungs and cause health problems.
• In Japan, the micrometer is used to measure the thickness of paper and film products. The standard paper size A4 has a thickness of about 100 µm, while a typical plastic wrap has a thickness of about 10 µm.

Example conversions of micrometer to other units

Here are some sample conversions of micrometer to other units:

• 1 µm = 0.001 mm
• 1 µm = 0.000001 m
• 1 µm = 0.000000001 km
• 1 µm = 0.000039 in
• 1 µm = 0.0000033 ft
• 1 µm = 0.00000062 mi
• 1 µm = 10^^-6 m